Описание

Function of humidification and dehumidification / Hysteresis function
Humidity correction / Delay protection
Function of Upper and Lower limit / with wide humidity measuring range and controlling range
Comes with a humidity controller sensor probe with cable and a temperature sensor probe with cable
Humidity Measuring Range: 1% ~ 99% RH / Humidity controlling range: 1% ~ 99% RH
Specification:
Humidity Measuring Error: 3%
Resolution: 1% RH;
Sensor Type: HM-40
Power Suppler: AC 220V
Current: MAX 200MA
Data retention: YES
Power consumption: Relay contact current: AC 5A/220V
Temperature compensation: YES
Data Retention: YES
Working temperature: 0°C - 50 °C
Storage temperature: -10°C - 60 °C
Size(L x W x H): Approx. 83 x 75 x 33mm
Probe size(D x L): Approx. 4 x 20mm
Key notes:
RST: Press key RST to switch satrting up and power off, on the condition of power off, it can start up when press key RST, on the condition of starting up, it can power off when press and hold the key RST for three seconds.
SET: Press key SET to enter settings of humidity control, and press key ▲ or ▼ to adjust.
Press and hold key ▲ or ▼ for three seconds to enter the fast adjust mode.
Press key SET again to exit setting mode.
Package Includes:
1 x Humidity controller WH8040
1 x Humidity controller sensor probe with cable
1 x Temperature sensor probe with cable
NOTE: For customers from Europe, Australia, New Zealand, most Asian Countries, South America and Africa, Use 220 V.
The temperature sensor being used to calculate humidity more precise depending on the temperature inside of the house and it should be installed in the vicinity of the humidity probe.
Note:Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
Humidity correction / Delay protection
Function of Upper and Lower limit / with wide humidity measuring range and controlling range
Comes with a humidity controller sensor probe with cable and a temperature sensor probe with cable
Humidity Measuring Range: 1% ~ 99% RH / Humidity controlling range: 1% ~ 99% RH
Specification:
Humidity Measuring Error: 3%
Resolution: 1% RH;
Sensor Type: HM-40
Power Suppler: AC 220V
Current: MAX 200MA
Data retention: YES
Power consumption: Relay contact current: AC 5A/220V
Temperature compensation: YES
Data Retention: YES
Working temperature: 0°C - 50 °C
Storage temperature: -10°C - 60 °C
Size(L x W x H): Approx. 83 x 75 x 33mm
Probe size(D x L): Approx. 4 x 20mm
Key notes:
RST: Press key RST to switch satrting up and power off, on the condition of power off, it can start up when press key RST, on the condition of starting up, it can power off when press and hold the key RST for three seconds.
SET: Press key SET to enter settings of humidity control, and press key ▲ or ▼ to adjust.
Press and hold key ▲ or ▼ for three seconds to enter the fast adjust mode.
Press key SET again to exit setting mode.
Package Includes:
1 x Humidity controller WH8040
1 x Humidity controller sensor probe with cable
1 x Temperature sensor probe with cable
NOTE: For customers from Europe, Australia, New Zealand, most Asian Countries, South America and Africa, Use 220 V.
The temperature sensor being used to calculate humidity more precise depending on the temperature inside of the house and it should be installed in the vicinity of the humidity probe.
Note:Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.

|

ВсеТовар мы можем отгрузить в течение 5-8 рабочих дней, обычно мыВ зависимости от времени заказа клиента для упаковки и отгрузки, мы должныВнимательно проверьте качество товара перед отправкой, поэтому ВозьмитеВремени, чтобы справиться с этим. Время доставки: Из-заК факторам форс-мажорных обстоятельств: ураганы, дождевые штормы влияют на полеты. ВедущийДля того чтобы логистика задержки. Мы честные продавцы, не дадим вам страдатьПотери. Пожалуйста, дайте логистической компании немного времени на обработку, мыПодождите, пока посылка дойдет до вашей стороны. Если ваша информация о логистике поступает в местное почтовое отделение: В том случае, еслиМестное почтовое отделение не свяжется с вами, пожалуйста, свяжитесь с вашимМестное почтовое отделение как можно скорее, чтобы получить посылка. В противном случаеСверхурочное получение посылок, местное почтовое отделение вернет вамПосылка, ответственность за себя. Время защиты заканчивается: В тех случаях, когдаМы закончили время отгрузки, если срок защиты продуктаНа исходе, пожалуйста, увеличьте срок защиты продукта самостоятельно илиСвяжитесь с нами, пожалуйста, не открывайте спор напрямую. Ввозные таможенные пошлины: НалогиИ сборы не включены в стоимость товара или стоимость доставки.Ответственность за эти расходы несет покупатель. Ввозные пошлины, налоги иРасходы не включены в стоимость товара или стоимость доставки. ЭтиРасходы оплачиваются покупателем




Если товар поврежден, мы должны связаться в течение 24 часов с момента получения.
Если данный товар находится в вашем распоряжении более 7 дней, он считается пользованным товаром, и мы не производим возврат или замену. В том случае, еслиВы не удовлетворены полученным товаром (неправильный, поврежденный,Дефект, или товар не соответствует описанию), пожалуйста, верните его в течение 7 дней дляЗамена или возврат денег.Для любогоЛичные причины (выбрать не нравится или мне не нужен этот продуктБольше), возврат расходы по доставке будет нести ответственность покупателя. МыНе принимаются какие-либо предметы с запахами (духи. Дым, и т. Д.)
ВсеВозвращенные товары должны быть в оригинальной упаковке, и вы должны предоставитьНам с номером отслеживания доставки, конкретной причиной возврата,И ваш заказ ID.Характеристики
- Бренд
- MiLESEEY
- Применение
- Промышленный
- Номер модели
- Humidity controller
- Стиль
- Портативный
- Максимальная температура измерения
- 120 ° С и Выше
- Размер дисплея
- 1.9 Дюйм(ов) и ниже
- Основы
- Температурный датчик
- Тип дисплея
- Цифровой
- Тип питания
- Нет














